Safety concerns for close to 2000 Mercedes-Benz cars

Mercedes-Benz New Zealand has confirmed a recall for nearly 2000 vehicles built between 2005 and 2013 concerning the brake booster, which could be affected by corrosion.

Specifically, Mercedes says the booster might be affected by advanced corrosion in the joint area of the housing.

‘‘After extended time in the field and in conjunction with significantwater exposure, this corrosionmight lead to a leakage of the brake booster.

‘‘In this case, the brake force support might be reduced, leading to an increase in the brake pedal force required from the driver to decelerate the vehicle and/or to a potentially increased stopping distance.

This may be accompanied by a hissing or airflow noisewhen applying the brake.’’

In rare cases, severe corrosion combinedwith hard braking might cause mechanical damage to the booster, causing the connection between the brake pedal and brake system to fail, and the brakes be rendered useless.

The foot-operated parking brake is unaffected by the issue, Mercedes says.

Accordingly, Mercedes-Benz is initiating a recall and has sent letters to the owners of all potentially affected vehicles.

The recall processwill involve inspecting potentially affected vehicles and, depending on the results of the inspection, replacing the partswhere necessary. Until the inspection takes place, Mercedes asks owners not to drive their vehicles. If necessary, MercedesBenz will work with the customer to arrange an alternative transport solution during this time.

The affected models are: ML280 CDI, ML300 CDI, ML350 CDI, ML 350, ML420 CDI, ML 500, ML63 AMG, GL 320 CDI, GL 350 CDI, GL 450 CDI, GL 500, R 320 CDI, R 350, R 500, R 63 AMGand R 350 CDI. Owners with questions or concerns are asked to please contact their preferred authorised Mercedes-Benz Service Centre.

Alternatively, information is available at the Mercedes-Benzwebsite via mercedes-benz.co.nz.